*
NOTE Damage to the drivetrain due to
incorrect positioning
#
Do not position the vehicle above the
connection point of the transport vehi‐
cle.
Towing eye storage location
Towing eye
1
is located with the vehicle tool kit
under the trunk floor.
Installing the towing eye
#
Press the mark on cover
1
inwards and
remove.
#
Screw in the towing eye clockwise as far as it
will go and tighten.
%
Make sure that cover
1
engages in the
bumper when you remove the towing eye.
*
NOTE Damage to the vehicle due to
incorrect use of the towing eye
When a towing eye is used to recover a vehi‐
cle, the vehicle may be damaged in the proc‐
ess.
#
Only use the towing eye to tow away or
tow start the vehicle.
Tow-starting the vehicle (emergency engine
start)
*
NOTE Damage to the automatic trans‐
mission due to tow starting
The automatic transmission may be damaged
in the process of tow starting vehicles with
automatic transmission.
#
Vehicles with automatic transmission
must not be tow started.
#
Vehicles with automatic transmission must
not be tow-started.
Breakdown assistance 361
Summary of Contents for S 560 4MATIC
