Mercedes-Benz ML 350, Operator'S Manual

Page: 267 / 344

267
Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement
앫
Use only 12-volt bulbs of the same type
and with the specified watt rating.
앫 Switch lights off before changing a bulb
to prevent short circuits.
앫 Always use a clean lint-free cloth when
handling bulbs.
앫
Your hands should be dry and free of oil
and grease.
앫 If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Light Truck Center.
앫
Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Light Truck Center:
앫 Additional turn signals in the exteri-
or rear view mirrors
앫
Bi-Xenon lamps*
앫
Front fog lamps (vehicles with sport
package)*
Lamp Type
6 Brake lamp 1073
(32 cp bulb)
7 Backup lamp 1073
(32 cp bulb)
8 Turn signal lamp PY 21 W
9 Tail, parking and
standing lamp
Rear fog lamp, driv-
er’s side P 21/4 W
a Side marker lamp W 5 W
b High mounted brake
lamp 1073
(32 cp bulb)
c License plate lamps C 5 W
Warning!
G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
앫
touch or move it when hot
앫
drop the bulb
앫
scratch the bulb
Wear eye and hand protection.
Because of high voltage in xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.