Mercedes-Benz ML 350, Operator'S Manual

Page: 276 / 344

276
Practical hints
Flat tire
Removing the wheel
왘
Unscrew and remove all wheel bolts.
왘 Remove the remaining bolts.
왘 Grip the wheel from the sides and re-
move it.
Mounting the new wheel
왘
Clean contact surfaces of wheel and
wheel hub.
왘 Install spare wheel on wheel hub.
왘
Insert wheel bolts and tighten them
slightly.
Lowering the vehicle
왘 Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
왘
Remove the jack.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
!
To avoid paint damage, place wheel flat
against hub and hold it there while in-
stalling first wheel bolt.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Light Truck Center
or call Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure to use the correct wheel bolts.
Warning!
G
Use only genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
tip over.