Mercedes-Benz ML 350, Operator'S Manual

Page: 184 / 344

184
Controls in detail
Useful features
Step 9:
왘
Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:
왘 Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (
3 , 4
or 5 ).
Step 11:
왘 Press, hold for two seconds and re-
lease same button a second time to
complete the training process.
Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
Step 12:
왘
Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (
3 , 4
or 5 ).
Step 13:
왘
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having dif-
ficulties programming a gate operator (re-
gardless of where you live) by using the
programming procedures, replace step 4
with the following:
컄컄