Mercedes-Benz ML 320 CDI Operator'S Manual Download Page 438

Page: 438 / 585

437

Practical hints

What to do if …

Display message

Possible cause/consequence

Possible solution

ESP

unavailable
See Operator’s Manual

The ESP

was deactivated because

of insufficient power supply. The
charging voltage has fallen below
10 volts.

The brake system is still functioning
normally but without the ABS
available.

When the voltage is above this value again, the
ABS is operational again and the message in the
multifunction display should disappear.

If the message in the multifunction display does
not disappear:

왘

Have the generator (alternator) and the
battery checked.

If the yellow ESP

warning

lamp

flashes while driving and

this message appears, the electron-
ic traction system has switched off
to prevent overheating of the drive
wheel brakes.

As soon as the brakes have cooled off, the
electronic traction system switches on again.

The message in the multifunction display disap-
pears and the ESP

warning lamp

goes

out.

The self-diagnosis has not been
completed yet.

The display will clear after driving a short
distance at a vehicle speed of above
12 mph (20 km/h).

Summary of Contents for ML 320 CDI










































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands

Mercedes-Benz ML 320 CDI, Operator'S Manual

Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands