Mercedes-Benz ML 320 CDI Operator'S Manual Download Page 58

Page: 58 / 585

Getting started

Driving

Starting difficulties

If the engine does not start as described,
carry out the following steps:

왘

If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position

and repeat starting

procedure.

왘

If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better
detection of the SmartKey with
KEYLESS-GO*.

Or:

왘

Remove KEYLESS-GO* start/stop
button from starter switch (

컄

page 41).

왘

Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.

왘

Repeat the starting procedure
(

컄

page 54). Remember that extended

starting attempts can drain the battery.

왘

Get a jump start (

컄

page 515).

If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.

왘

Notify an authorized Mercedes-Benz
Light Truck Center.

Parking brake

Parking brake pedal

Release handle

왘

Release the parking brake by pulling on
release handle

The warning lamp

;

(USA only)

(Canada only) in the

instrument cluster goes out.

Warning!

When leaving the vehicle, always remove the

SmartKey or SmartKey with KEYLESS-GO*

from the starter switch, take it with you and

lock the vehicle. Do not leave children unat-

tended in the vehicle, or with access to an

unlocked vehicle. Children could release the

parking brake, which could result in an acci-

dent and/or serious injury.

Summary of Contents for ML 320 CDI










































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands

Mercedes-Benz ML 320 CDI, Operator'S Manual

Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands