Mercedes-Benz ML 320 CDI, Operator'S Manual, Page: 136 / 585

135
Controls in detail
Memory function*
The memory button and stored position
buttons are located on the entry side of
each front seat base.
M Memory button
1, 2, 3 Stored position buttons
왘
Switch on the ignition (
컄
page 40).
or
왘
Open the respective door.
Storing positions into memory
왘
Adjust the seats (
컄
page 43).
왘
On the driver’s side, additionally adjust
the steering wheel (
컄
page 48) and ex-
terior rear view mirrors (
컄
page 49) to
the desired positions.
왘
Press memory button M .
왘
Release memory button M and press
stored position 1 , 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
왘
Press and hold stored position
button
1 , 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!
Do not operate the power seats using
memory button M if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
i
Releasing the stored position button stops
movement to the stored positions immediately.