Mercedes-Benz ML 320 CDI Operator'S Manual Download

Page: 416 / 585

415

Practical hints

What to do if …

Problem

Possible cause/conse-
quence

Suggested solution

;

(USA only)

(Canada only)

The red brake warning lamp
comes on while driving and
you hear a warning sound.

You are driving with the
parking brake set.

왘

Release the parking brake
(

컄

page 57).

There is insufficient brake fluid
in the reservoir.

왘

Risk of accident! Carefully stop the
vehicle in a safe location or as soon it
is safe to do so.

왘

Apply the parking brake (

컄

page 65).

왘

Notify an authorized Mercedes-Benz
Light Truck Center. Do not add brake
fluid! This will not solve the problem.

Warning!

Driving with the brake warning lamp illumi-

nated can result in an accident. Have your

brake system checked immediately if the

brake warning lamp stays on.

Do not add brake fluid before checking the

brake system. Overfilling the brake fluid res-

ervoir can result in spilling brake fluid on hot

engine parts and the brake fluid catching

fire. You can be seriously burned.

If you find that the brake fluid in the brake

fluid reservoir has fallen to the minimum mark or
below, have the brake system checked for brake
pad thickness and leaks.

Summary of Contents for ML 320 CDI










































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands

Mercedes-Benz ML 320 CDI, Operator'S Manual

Search results

Summary of Contents for ML 320 CDI

Reviews:

Related manuals for ML 320 CDI

Brands by name

Popular brands