Mercedes-Benz ML 320 CDI, Operator'S Manual, Page: 260 / 585

259
Controls in detail
Driving systems
Setting to last stored speed
(“Resume” function)
왘
Briefly pull the cruise control lever in
direction of arrow
4
(
컄
page 255).
The Distronic resumes to the last set
speed.
왘
Remove your foot from the accelerator
pedal.
The last set speed or, if no speed is stored,
the current set speed appears in the
multifunction display for approximately
5 seconds.
Deactivating Distronic
There are several ways to deactivate the
Distronic system:
왘
Step on the brake pedal.
or
왘
Briefly tip the cruise control lever in
direction of arrow
3
(
컄
page 256).
Distronic will be deactivated. The last set
speed will be stored in memory.
Warning!
G
The set speed stored in memory should only
be set again if prevailing road conditions
permit. Possible acceleration or decelera-
tion differences arising from returning to the
preset speed could cause an accident
and/or serious injury to you and others.
i
The following message appears in the multi-
function display for approximately 5 seconds:
DISTRONIC Off
.
The last stored set speed is deleted when the
engine is turned off.
i
The Distronic switches off automatically
when
앫
you step on the brake pedal
앫
you depress the parking brake pedal
In this case, the Distronic speed segments in the
speedometer (
컄
page 253) will go out.
앫
the vehicle speed falls below 20 mph
(30 km/h)
앫
the ESP
®
is in operation
앫
the ESP
®
is switched off with the ESP
®
switch (
컄
page 99)
앫
the ESP
®
has switched off due to a
malfunction (
컄
page 419)
앫
you set the automatic transmission to N
while driving
The Distronic speed segments in the
speedometer (
컄
page 253) will go out and an
acoustic warning will sound.