Mercedes-Benz ML 320 CDI, Operator'S Manual, Page: 115 / 585

114
Controls in detail
Locking and unlocking
앫
If the SmartKey with KEYLESS-GO is re-
moved from the vehicle (e.g. if a pas-
senger exits the vehicle with the
SmartKey with KEYLESS-GO)
앫
when pressing the KEYLESS-GO
start/stop button or trying to lock
the vehicle with the look button on
an outside door handle the mes-
sage
Key not detected appears in
the multifunction display
앫
with the engine running, the mes-
sage
Key not detected appears in
the multifunction display while
driving off.
Find the SmartKey with KEYLESS-GO or
change its present location immediate-
ly (e.g. place it on the front passenger
seat or insert it in shirt pocket).
앫
If you have started the engine with the
KEYLESS-GO start/stop button
(
컄
page 55), you can turn it off again
with
앫
the KEYLESS-GO start/stop button
(
컄
page 67)
앫
the SmartKey inserted in the starter
switch, when the automatic trans-
mission is in position
P
앫
Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle.
Possibility 1 (One SmartKey with
KEYLESS-GO in the vehicle, one
SmartKey with KEYLESS-GO outside
the vehicle):
If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, no message
appears in the multifunction display.
Possibility 2 (One SmartKey with
KEYLESS-GO in the vehicle, no
SmartKey with KEYLESS-GO outside
the vehicle):
When exiting and trying to lock the
vehicle, the message
Key detected in
vehicle will appear in the multifunction
display. The vehicle will not be locked.