As soon as the vehicle is loaded:
X
Secure the vehicle against rolling away by
applying the electric parking brake.
X
Vehicles with manual transmission: fully
depress the clutch pedal and engage first or
reverse gear.
X
Vehicles with automatic transmission:
shift the automatic transmission to position
P.
X
Turn the key to position 0in the ignition lock
and remove it.
X
Secure the vehicle.
Notes for 4MATIC vehicles
!
Vehicles with 4MATIC must not be towed
with the front or rear axle raised; otherwise,
the transmission may be damaged.
Vehicles with 4MATIC may either be towed away
with both axles on the ground or be loaded up
and transported.
If the vehicle has transmission damage or dam-
age to the front or rear axle, have it transported
on a transporter or trailer.
In the event of damage to the electrical sys-
tem: if the battery is defective, the automatic
transmission will be locked in position P. To shift
the automatic transmission to position N, you
must provide power to the vehicle's electrical
system in the same way as when jump-starting
(
Y
page 333).
Have the vehicle transported on a transporter or
trailer.
Tow-starting (emergency engine
starting)
!
Do not tow-start vehicles with automatic
transmission. You could otherwise damage
the automatic transmission.
i
You can find information on "Jump-starting"
under (
Y
page 333).
Before tow-starting, the following conditions
must be fulfilled:
R
the battery is connected
R
the engine has cooled down
R
the exhaust system has cooled down
When tow-starting, it is important that you
observe the safety notes (
Y
page 336) and the
legal requirements in each respective country.
X
Switch on the hazard warning lamps
(
Y
page 116).
X
Fit the towing eye (
Y
page 337).
X
Secure the rigid towing bar or the towing
rope.
X
Depress the brake pedal and keep it
depressed.
X
Turn the key to position 2 in the ignition lock.
X
Depress the clutch pedal fully, engage 2nd
gear and continue to keep the clutch pedal
fully depressed.
X
Release the brake pedal.
X
Tow-start the vehicle.
X
Release the clutch pedal slowly; do not
depress the accelerator pedal while doing so.
X
When the engine has been started, immedi-
ately depress the clutch pedal fully and shift
to neutral.
X
Pull over at a suitable place and stop the vehi-
cle safely, paying attention to road and traffic
conditions.
X
Use the electric parking brake to secure the
vehicle and prevent it from rolling away.
X
Remove the rigid towing bar or towing rope.
X
Remove the towing eye (
Y
page 337).
X
Switch off the hazard warning lamps.
Fuses
Important safety notes
G
WARNING
If you manipulate, bridge or replace a faulty
fuse with a fuse of a higher amperage, the
electric cables could be overloaded. This may
result in a fire. There is a risk of an accident
and injury.
Always replace faulty fuses with specified new
fuses of the correct amperage.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the
colour and fuse rating. The fuse ratings are listed
in the fuse allocation chart.
The fuse allocation chart is on the fuse box in the
boot (
Y
page 341).
Fuses
339
Br
eak
down
ass
ist
ance
Z
Summary of Contents for GLC Coupe 2016
