Mercedes-Benz GLC Coupe 2016, Owner'S Manual

Page: 331 / 377

Therefore, place the filler hose in the plastic
bag which contained the TIREFIT kit.
H
Environmental note
Have the used tyre sealant bottle disposed of
professionally, e.g. at a qualified specialist
workshop.
!
Do not operate the tyre inflation compres-
sor for longer than ten minutes at a time with-
out a break. It may otherwise overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the sticker on the tyre inflation com-
pressor.
Using the TIREFIT kit
X
Do not remove any foreign objects that have
penetrated the tyre, e.g. screws or nails.
X
Remove the tyre sealant bottle, the accom-
panying TIREFIT sticker and the tyre inflation
compressor from the stowage space under
the boot floor (
Y
page 325).
X
Affix part : of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
X
Affix part ; of the TIREFIT sticker near the
valve on the wheel with the defective tyre.
X
Remove filler hose B and connector = from
bottom section of tyre inflation compressor
housing ; .
X
Slide yellow filler hose connector into mount-
ing on yellow cap A of tyre sealant bottle :
until connector engages.
X
With sealing rings in front, slide yellow cap A
of tyre sealant bottle : into the holder of tyre
inflation compressor ; . The cap must
engage in both hooks.
X
Remove cap from valve C on faulty tyre.
X
Screw filler hose D onto valve C .
X
Insert connector = into cigarette lighter
socket (
Y
page 303) or into another 12 V
socket in your vehicle (
Y
page 303).
X
Turn the key to position 1 in the ignition lock
(
Y
page 133).
X
Press on/off switch ? on tyre inflation com-
pressor to ON position.
The tyre inflation compressor is switched on.
The tyre is inflated.
First, tyre sealant is pumped into the tyre. The
pressure may briefly rise to approximately
500 kPa (5 bar/73 psi).
328
Flat tyre
Breakdown
assistance