Semi-universal child restraint systems are indi-
cated by the text "semi-universal" on the
approval label. These can be used if the vehicle
and the seat are listed in the child restraint sys-
tem manufacturer's vehicle model list. For fur-
ther information, contact the child restraint sys-
tem manufacturer or visit the manufacturer's
website.
If circumstances require you to fit a child
restraint system on the front-passenger seat:
X
Always observe the notes under "Child
restraint system on the front-passenger seat"
(
Y
page 61).
There you will find instructions on how to cor-
rectly route the shoulder belt strap from the
vehicle belt outlet to the shoulder belt guide
on the child restraint system (
Y
page 62).
X
Move the front-passenger seat as far back as
possible and fully retract the seat cushion
length.
X
Move the backrest to an almost vertical posi-
tion.
The entire base of the child restraint system
must always rest on the seat cushion of the
front-passenger seat. The backrest of the
forward-facing child restraint system must, as
far as possible, be resting on the backrest of
the front-passenger seat. The child restraint
system must not touch the roof or be put
under strain by the head restraint. Adjust the
angle of the seat backrest and the head
restraint position accordingly. In addition,
observe the child restraint system manufac-
turer's installation instructions.
X
Move the seat cushion angle to the highest,
most vertical position.
Suitability of the seats for attaching a belt-secured child restraint system
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forwards
slightly.
For certain child restraint systems in weight categories II or III, this can mean that the area of use
is restricted. The maximum size setting of the child restraint system may not be possible due to
possible contact with the roof.
When the soft top is opened and closed, child restraint systems of weight categories II or III must be
removed or the head restraint of the child restraint system must be set to the lowest position.
You can have the head restraints of the rear seats removed and installed by a qualified specialist
workshop. This may be necessary for the use of certain child restraint systems.
In addition, always observe the notes under "Child restraint system" (
Y
page 60) and the child
restraint system manufacturer's installation instructions.
Legend for the table:
X Seat that is unsuitable for children in this weight category.
U Suitable for child restraint systems in the "Universal" category that are approved for use in this
weight category.
UF Suitable for forward-facing child restraint systems that belong to the "Universal" category and
are approved for use in this weight category.
L Suitable for child restraint systems as recommended; see the "Recommended child restraint
systems" table (
Y
page 65). Suitable for semi-universal child restraint systems if the vehicle
and the seat are listed in the child restraint system manufacturer's vehicle model list.
Children in the vehicle
63
Saf
ety
Z
Summary of Contents for GLC Coupe 2016
