Automatic anti-dazzle mirrors
G
WARNING
Electrolyte may escape if the glass of an auto-
matic anti-dazzle mirror breaks. Electrolyte is
harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with electrolyte,
observe the following:
R
immediately rinse off electrolyte from your
skin with water.
R
immediately and thoroughly rinse electro-
lyte out of eyes using clean water.
R
if electrolyte is swallowed, immediately
rinse out your mouth thoroughly. Do not
induce vomiting.
R
if electrolyte comes into contact with skin
or eyes or is swallowed, seek medical atten-
tion immediately.
R
immediately change out of clothing that has
been in contact with electrolyte.
R
if an allergic reaction occurs, seek medical
attention immediately.
The exterior mirror on the driver's side and the
rear-view mirror automatically go into anti-daz-
zle mode if:
R
the ignition is switched on
R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not dip if reverse gear is engaged
or if the interior lighting is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Storing the parking position
You can set the front-passenger-side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
Storing using reverse gear
:
Memory button M
;
Button for the exterior mirror setting
=
Button for the exterior mirror on the front-
passenger side
?
Button for the exterior mirror on the driver's
side
X
Start the engine.
X
Press button
=
.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use button
;
to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the kerb.
The parking position is stored.
i
If you shift the gears to another position, the
exterior mirror on the front-passenger side
returns to the driving position.
Storing using the memory button
You can store the parking position of the front-
passenger-side exterior mirror using memory
button M
:
. Reverse gear must not be
engaged.
X
Turn the key to position 2 in the ignition lock
(
Y
page 133).
X
Press button
=
.
X
Use button
;
to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the kerb.
X
Press memory button M
:
and one of the
arrows on button
;
within three seconds.
The parking position is stored if the exterior
mirror does not move.
Mirrors
111
Sea
ts
,ste
er
ing
wheel
and
mirro
rs
Z
Summary of Contents for GLC Coupe 2016
