Fitting/removing the folding draught
stop
Fitting
The folding draught stop is stored in a bag. The
bag is attached with a securing strap to the
through-loading facility behind the rear seats.
If you wish to use the through-loading facility,
loosen the securing strap attached to the
through-loading facility and stow the folding
draught stop in the boot. Use the securing strap
to fasten the bag to one of the luggage hooks in
the boot.
X
Open all side windows and the soft top.
X
Fold the rear seats forward (
Y
page 299) and
remove the bag containing the folding
draught stop.
X
Remove the folding draught stop from the
bag.
X
Fold out the folding draught stop
:
as
shown.
X
Fold out the two brackets
;
to the left and
right.
X
Align the brackets
;
of the folding draught
stop
:
with the two rear fixtures
=
on the
vehicle.
Perform the following steps in sequence on both
sides of the vehicle:
X
Pull the handle
?
in the direction of the
arrow.
X
Align the folding draught stop
:
with the side
fixture
A
on the vehicle from above and
insert.
X
Push the handle
?
on the folding draught
stop
:
back as far as it will go.
The folding draught stop
:
is locked.
Removing
X
Pull the handles
?
on the left and right one
after the other and slide the folding draught
stop
:
out of fixture
A
from above.
The folding draught stop
:
is unlocked.
X
Pull the folding draught stop
:
out of the two
rear fixtures
=
.
98
Convertible top
Op
ening
and
closing
Summary of Contents for GLC Coupe 2016
