Mercedes-Benz EQS Saloon 2021, Owner'S Manual

Page: 212 / 645

#
Never touch damaged components of
the high-voltage on-board electrical sys-
tem.
#
After an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system.
#
After an accident, have the vehicle trans-
ported away.
#
Have the components of the high-voltage
on-board electrical system checked at a
qualified specialist workshop and
replaced if necessary.
Requirements:
Only disconnect the high-voltage on-board electri-
cal system manually in the following situations:
R
The
6
restraint system warning lamp lights
up in the driver's display, e.g. after an acci-
dent.
R
The vehicle is badly damaged, e.g. after an
accident, and the restraint system compo-
nents have not been triggered.
Operating the high-voltage disconnect device
#
Switch off the vehicle.
#
Shift the transmission to position
j
.
#
Apply the electric parking brake.
#
Secure the vehicle against rolling away.
#
Open the bonnet.
#
Press release tab
1
in the direction of the
arrow and pull it out.
#
Pull high-voltage disconnect device 2 in the
direction of the arrow until it engages.
The high-voltage on-board electrical system is
switched off.
All work on the hybrid drive system (including
after disconnecting the high-voltage on-board
electrical system manually) may only be carried
out in a qualified specialist workshop.
Switching on the power supply or the vehicle
&
WARNING Risk of accident and injury due
to leaving children unattended in the vehi-
cle
If children are left unattended in the vehicle,
they could, in particular:
R
open doors, thereby endangering other
persons or road users.
R
get out and be struck by oncoming traffic.
Driving and parking 209