Mercedes-Benz EQS Saloon 2021, Owner'S Manual

Page: 464 / 645

#
Before loading the vehicle, wait until transport
level has been reached and the
Transport
level status is shown.
%
If the vehicle is raised to transport level, the
transport settings will continue to be shown
even after a restart. Operation of the driver's
display is restricted.
When the vehicle is at transport level, it is lowered
again in the following situations:
R
When driving faster than 40 km/h.
R
The 12 V battery is discharged.
The vehicle is adjusted to the height of the last
active level.
Transporting the vehicle
#
Load the vehicle onto the transporter.
#
Shift the transmission to position
j
.
#
Use the electric parking brake to secure the
vehicle against rolling away.
#
Switch off the vehicle and the power supply.
#
Only secure the vehicle by the wheels.
4MATIC vehicles
#
Make sure that the front and rear axles come
to rest on the same transportation vehicle.
* NOTE Damage to the drive train due to
incorrect positioning of the vehicle
#
Do not position the vehicle above the
connection point of the transport vehi-
cle.
Unloading the vehicle
#
Make sure that the vehicle is raised to trans-
port level before unloading (
/
page 459).
Lowering the vehicle after unloading
#
Switch on the power supply.
#
Start the vehicle.
#
Swipe upward in the transport settings to
select Standard level and press
a
.
The vehicle is adjusted to the height of the last
active level and the Lowering vehicle message
is displayed.
#
After the vehicle has been lowered, press the
G button for at least two seconds.
The transport settings are closed.
Breakdown assistance 461