Mercedes-Benz EQS Saloon 2021, Owner'S Manual

Page: 390 / 645

Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
#
Select Z Drag race options .
#
Select Quarter-mile .
#
Set a target distance.
Measurement stops as soon as the specified
target distance has been reached.
#
Start off and begin the measurement.
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Measuring braking
#
Z Drag Race options
#
Select Braking .
#
Set a starting speed or select Automatic .
#
Start off and begin the measurement.
#
Brake to a stop.
Measurement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached.
Storing and calling up measured values
If measurement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved.
#
Confirm the prompt with OK to save.
Calling up saved measurements
#
± Select History .
#
Select Acceleration , Quarter-mile or Braking .
#
Select a measurement.
The desired measurement is displayed in
detail.
or
#
Delete a measurement.
Calling up the telemetry display
Multimedia system:
4
TRACK PACE
5
Telemetry
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
R
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
#
Set the desired parameters.
#
Set the time.
The set parameters are evaluated in the dia-
gram for the selected time.
Configuring AMG TRACK PACE
Requirements:
To connect a mobile device to the TRACK PACE
app:
MBUX multimedia system 387