Mercedes-Benz E-Class Wagon, Operator'S Manual

Page: 395 / 510

#
Position jack 2 at jack support point 1 .
#
Turn ratchet ring spanner 3 clockwise until
jack 2 sits completely on jack support point
1 and the base of the jack lies evenly on
the ground.
#
Continue to turn ratchet ring spanner 3
until the tire is raised a maximum of 1.2 in
(3 cm) off the ground.
#
Loosen and remove the wheel (
→
page 393).
Removing a wheel
Requirement:
R
The vehicle is raised (
→
page 391).
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the uppermost wheel bolt com‐
pletely.
#
Screw centering pin 1 instead of the wheel
bolt into the threading.
#
Unscrew the remaining wheel bolts fully.
#
Remove the wheel.
#
Install the new wheel (
→
page 393).
Installing a new wheel
Requirement:
R
The wheel is removed (
→
page 393).
Wheels and tires 393