Mercedes-Benz E-Class Wagon, Operator'S Manual

Page: 259 / 510

Importing/exporting data
* NOTE Data loss
#
Do not remove the data storage
medium when data is being exported.
Mercedes-Benz is not liable for any loss of
data.
Requirements
R
The vehicle is stationary.
R
The ignition is switched on or the vehicle has
been started.
R
The SD card is inserted (
→
page 312) or the
USB device is connected (
→
page 314).
Multimedia system:
, .
#
Select or .
Importing
#
Select a data storage medium.
A prompt appears asking whether you really
wish to overwrite the current data. If data
originates from another vehicle, this is recog‐
nized during data reading.
The multimedia system is restarted once the
data has been imported.
% Current vehicle settings can be edited after
the import.
Exporting
If PIN protection is activated, your PIN is reques‐
ted.
#
Enter the four-digit PIN.
#
Select a data storage medium.
The data is exported. The data export may
take several minutes.
Activating/deactivating PIN protection
Multimedia system:
, .
Setting the PIN
#
Select .
#
Enter a four-digit PIN.
#
Enter the four-digit PIN again.
If both PINs match, PIN protection is active.
Changing the PIN
Requirement
R
A current PIN must be set.
#
Select .
#
Enter the current PIN.
#
Select .
#
Set a new PIN.
Activating PIN protection for data export
#
Select .
Confirm with the PIN.
#
Select .
Activate O or deactivate ª the function.
Activating PIN protection for offline mode
#
Select .
Confirm with the PIN.
#
Select .
Activate O or deactivate ª the function.
Multimedia system 257