Mercedes-Benz E-Class Wagon, Operator'S Manual

Page: 115 / 510

#
Insert two brackets 5 into the load rail
(
→
page 112).
#
Press and hold release knob 1 on luggage
holder 2 .
#
Pull the belt on the handle out slightly.
#
Let go of release knob 1 .
Installing
#
Press and hold release knob 3 of first
bracket 5 .
#
Insert luggage holder 2 into first bracket 5
and slide it downwards until it engages.
#
Let go of release knob 3 .
#
Repeat the process with second bracket 5
and the handle.
Loading
#
Press and hold release knob 1 on luggage
holder 2 .
#
Pull the belt on the handle out.
#
Place the load between the strap and the
load compartment side wall.
#
Press and hold release knob 1 on luggage
holder 2 .
#
Hold the belt on the handle firmly and slowly
guide it back until the load has been
secured.
#
Let go of release knob 1 .
#
On both brackets 5 , press locking button
4 .
#
To remove: press release knob 3 on
respective bracket 5 and remove luggage
holder 2 by pulling it out.
Installing or removing the telescopic rod
Installing
The telescopic rod is used to secure loads
against the rear seats to prevent them from
moving around.
Seats and stowing 113