Mercedes-Benz E-Class Saloon, Owner'S Manual

Page: 165 / 612

Setting the departure time
#
Briefly press the u button.
#
Press the , or . button repeatedly
until the time to be changed appears on the
display.
#
Press the u and ^ buttons simultane‐
ously.
The Î symbol on the remote control display
flashes.
#
Press the , and . buttons to set the
desired departure time.
#
Press the u and ^ buttons simultane‐
ously.
The new departure time will be stored.
Up to three departure times can be stored.
#
To activate the departure time: select the
desired departure time and press and hold
the u button.
The Í symbol, the departure time and,
depending on the selected departure time,
the letter A, B or C appear on the display.
#
To deactivate the departure time: select
the desired departure time and press and
hold the ^ button.
OFF will appear on the display.
#
To check the status of the stationary
heater: briefly press the u button.
Switching off immediately
#
Press and hold the ^ button.
Overview of the remote control displays (sta‐
tionary heater/stationary ventilation)
1 Stationary ventilation switched on
2 Stationary heater switched on
3 Selected departure time
4 Remaining time for the stationary heater/
stationary ventilation (in minutes)
5
Stationary heater/stationary ventilation
active
6 Departure time activated
7 Signal strength
Further possible displays:
R
Time: activated departure time.
R
Zero minutes: the running time for the sta‐
tionary heater is increased, as the engine has
not yet reached operating temperature when
it is started.
R
OFF: the stationary heater/stationary venti‐
lation is switched off.
Climate control 163