Mercedes-Benz E-Class Convertible, Operator'S Manual

Page: 115 / 498

High-beam headlamps
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch beyond the
pressure point in the direction of arrow 1 .
When the high beam is activated, the L
indicator lamp for low beam is deactivated
and replaced by the K indicator lamp for
the high beam.
#
To switch off: move the combination switch
back to its starting position.
Headlamp flasher:
#
Pull the combination switch in the direction
of arrow 3 .
Turn signals
#
To indicate briefly: press the combination
switch briefly up to the pressure point in the
direction of arrow 2 or 4 .
The corresponding turn signal light flashes
three times.
#
To indicate permanently: press the combi‐
nation switch beyond the pressure point in
the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
light
#
Press button 1 .
Cornering light
Cornering light function
The cornering light improves the illumination of
the carriageway over a wide angle in the turning
direction, enabling better visibility on tight
bends, for example. It can be activated only
when the low beam is switched on.
The function is active:
R
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned.
Light and visibility 113