1
Rear wing
On the rear wings, it is recommended that you
install the antenna on the side of the vehicle
closest to the center of the road.
Use Technical Specification ISO/TS 21609 (Road
Vehicles – "EMCs for installation of aftermarket
radio frequency transmitting equipment") when
installing two-way radios. Comply with the legal
requirements for detachable parts.
If your vehicle has installations for two-way radio
equipment, use the power supply or antenna
connectors intended for use with the basic wir‐
ing. Be sure to observe the manufacturer's Sup‐
plements when installing.
Two-way radio transmission output
The maximum transmission output (PEAK) at the
base of the antenna must not exceed the values
in the following table:
frequency band and maximum transmission
output
Frequency band
Maximum transmis‐
sion output
Short wave
3 - 54 MHz
30 W
4 m frequency band
74 - 88 MHz
15 W
Frequency band
Maximum transmis‐
sion output
2 m frequency band
144 - 174 MHz
25 W
Trunked radio sys‐
tem/Tetra
380 - 460 MHz
10 W
70 cm frequency
band
420 - 450 MHz
15 W
Two-way radio
(2G/3G/4G)
10 W
The following can be used in the vehicle without
restrictions:
R
two-way radios with a maximum transmission
output of up to 100 mW
R
two-way radios with transmitter frequencies
in the 380 - 410 MHz frequency band and a
maximum transmission output of up to 2 W
(trunked radio system/Tetra)
384 Technical data
Summary of Contents for E-Class Convertible
