%
Please also read the operating instructions
for the garage door drive.
Troubleshooting when programming the
remote control
#
Check if the transmitter frequency of remote
control
5
is supported.
#
Replace the batteries in remote control
5
.
#
Hold remote control
5
at various angles at
a distance between 1 in (1 cm) to 3 in (8 cm)
in front of the inside rearview mirror. You
should test every position for at least 25 sec‐
onds before trying another position.
#
Hold remote control
5
at the same angles
at various distances in front of the inside
rearview mirror. You should test every posi‐
tion for at least 25 seconds before trying
another position.
#
Note that some remote controls transmit
only for a limited period, press button
6
on
remote control
5
again before transmission
ends.
#
Align the antenna line of the garage door
opener unit with the remote control.
%
Support and additional information on pro‐
gramming:
R
On the toll free HomeLink
®
Hotline on
1-800-355-3515.
R
On the Internet at http://
www.homelink.com/mercedes.
Opening/closing the garage door
Requirements
R
The corresponding button is programmed to
operate the garage door.
#
Press and hold buttons
1
,
2
or
3
until
the garage door opens or closes.
#
If indicator lamp
4
flashes yellow after
approximately 20 seconds: press and hold
the previously pressed button again until the
garage door opens or closes.
148 Driving and parking
Summary of Contents for E-Class Convertible
