Mercedes-Benz ACTROS 2002, Operating Instructions Manual

Page: 483 / 620

478
Practical advice
Transmission
1
2
3
4
5
6
7
8
9
Vehicles with Telligent
®
gearshift or
Telligent
®
automatic gearshift:
The short/ long teach-in procedure is nec-
essary to teach-in vehicle-specific data
into the automatic transmission control
(GS) electronics system.
Short teach-in procedure
The short teach-in procedure is required if
the sensors on the transmission or clutch
have been replaced.
To program the transmission control
(GS)
Apply the parking brake.
Turn key in the ignition lock to
position
0 .
Depress the clutch pedal fully and keep
it depressed.
Press the neutral button on gear lever
and hold it pressed.
Teach-in procedure
i
The charge pressure in the auxiliary
consumer compressed-air circuit must
be sufficient. The multi-function display
must not be showing "Charge pressure,
auxiliary consumer"
Œ
.
During the whole teach-in procedure,
the indicators for the high
f
and
the low splitter group
g
flash alter-
nately in the gears display.
If the teach-in procedure is interrupted,
the splitter group indicators will stop
flashing and an event message appears
in the multi-function display.
If transmission control (GS) interrupts
the teach-in procedure, turn key in the
ignition lock to position
0 .
The lights in the gear display go out.
Wait at least five seconds before re-
peating the teach-in procedure.
Vehicles with Telligent
®
automatic
gearshift: the clutch control (KS) auto-
matically disengages and engages dur-
ing the teach-in procedure.