Mercedes-Benz 300 SD-Turbo Diesel 1985, Owner'S Manual

Page: 34 / 105

Autom atic Clim ate Control
Temperature Selection (° C)
The interior tem perature can be adjusted by turning
the tem perature selector wheel. The selected
tem perature is reached as quickly as possible and
maintained. A basic setting of 22° C/72° F is
recom m ended. In order to avoid undesirable tem pera­
ture fluctuations, a set tem perature should be readjusted
in small increments.
To override the autom atic climate control, turn the
tem perature selector wheel to either extrem e end
position “ MAX” or “ MIN” .
“ MIN” = Peak cooling perform ance: the system
operates m ostly with recirculated air and a small am ount
of fresh air is added. If the fan control is set to
“ AUTO M ", it will run continuously in speed No. 5.
“ MAX” = Maximum heating perform ance. If the fan
control is set to “ AUTOM ” , it will run continuously in
speed No. 5.
32
Fan Setting
§
Selection fo r fan settings can be made as
follow s:
Push upper button fo r maximum fan speed (6th
speed).
Push lower button fo r minimum fan speed (1st speed).
Push middle button (spring loaded) fo r autom atic control
of air supply w ithin 2nd through 5th fan speed range.
S etting ^ = Always maximum fan speed.
Functions
(§ ) Off
In this setting, the fresh air supply to the interior of the
car is shut off, (to prevent entrance of odors, i.e., while
driving through tunnels, etc., o r to prevent the entrance
of w ater from autom atic car w ashes). Use this setting
only tem porarily while driving.