then goes out if both the driver and the front
passenger have fastened their seat belt.
i
Further information about the
7
seat
belt warning lamp (
Y
page 381).
Belt height adjustment
You can adjust the seat belt height on the
driver's seat and the front-passenger seat.
Adjust the belt to a height that allows it to be
routed across the middle of your shoulder.
X
To raise: slide the belt sash guide upwards.
The belt sash guide engages in various posi-
tions.
X
To lower: press and hold release but-
ton
:
.
X
Slide the belt sash guide downwards.
X
Release release button
:
and make sure
that the belt sash guide has engaged.
Rear seat belt status indicator
The rear-compartment seat belt status indi-
cator tells you if any of the rear passengers
do not have their seat belt fastened. The sta-
tus indicator also tells you how many of the
belt tongues are inserted into the seat belt
buckles.
The rear-compartment seat belt status indi-
cator appears in the multi-function display for
around 30 seconds if:
R
you set off and have reached a speed of
approximately 10 km/h.
R
the rear passengers fasten or unfasten
their seat belts while driving.
R
someone gets in or out of the vehicle.
You can also cancel the messages immedi-
ately (
Y
page 342).
The following messages appear in the multi-
function display:
R
7
No rear seat belt engaged
R
7
1 rear seat belt engaged
R
7
2 rear seat belts engaged
R
7
3 rear seat belts engaged
i
The status indicator for the rear-compart-
ment seat belts is only available for certain
countries.
Correct driver's seat position
206
Seat belts
Co
ntrol
s
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 206
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:41; WK
