Mercedes-Benz 2009 S-Class, Owner'S Manual

Page: 123 / 457

C
SMS menu
D
Input speller for entering telephone num-
ber
E
Convenience telephony display
Bars = display the current signal strength of
the mobile phone network. If all the bars are
filled, you have optimum reception. If all bars
are empty, there is very poor or no reception
at all.
Receiver symbol
? shows whether or not a
call is in progress or is being currently con-
nected.
The
0 symbol is displayed if you have an
unread text message. The symbol disappears
once you have read the text message. The
ú mail symbol is displayed when the text
message memory is full. The symbol disap-
pears once you delete at least one text mes-
sage.
The text message menu is available if this
function is supported by the convenience
telephone and bracket*. The text message
inbox is not available until all text messages
have been downloaded from the convenience
telephone. The Text message menu is not dis-
played during telephone calls using the Blue-
tooth ® interface.
Menu overview
Data/connections Text message
(SMS)
Call lists
Bluetooth telephones
Address book
Importing contacts
Deleting contacts Inbox
New
Drafts
Outbox Incoming calls
Dialled calls
Changing between Bluetooth ® and
convenience telephony*
If your vehicle is equipped with convenience
telephony*, you can switch between teleph-
ony types. If you want to use another mobile
phone, you will first need to connect it
(
Y
page 116).
Switching telephony type during opera-
tion
During operation, you can switch from one
telephony type to another by connecting
another mobile phone or by making a selec-
tion from the list.
Switching telephony type when switch-
ing on
By default, COMAND performs the following
actions when it is switched on:
Mobile phone is inserted in mobile phone
bracket*
COMAND starts convenience telephony*.
If no mobile phone is inserted in the mobile
phone bracket*, the following message
appears: Telephone not inserted . This is
followed by a prompt asking you whether you
wish to switch to Bluetooth ® telephony. If you
confirm by selecting Yes , the Ready for
Bluetooth telephony... message will
appear. COMAND will search for the two
mobile phones last connected via the Blue-
tooth
®
interface. If one of the two mobile
phones is found, the telephone basic menu
for Bluetooth
®
telephony (
Y
page 118)
120
Telephone*
COMAND
* optional
221_AKB; 2; 3, en-GB
bjanott, Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 120
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:10; WK