X
Fold the wiper arms away from the wind-
screen.
X
Clean the wiper blades carefully with a
damp cloth.
X
Fold the wiper arms back again before
switching on the ignition.
Cleaning the headlamps
X
Clean the plastic lenses of the headlamps
with a wet sponge and windscreen washer
fluid or cleaning cloths.
!
Only use washer fluid or cleaning cloths
suitable for plastic lenses. Unsuitable
washer fluid or cleaning cloths could
scratch or damage the plastic lenses of the
headlamps.
Cleaning the sensors*
X
Clean sensors
:
for the driving systems
with water, car shampoo and a soft cloth.
!
If you clean the sensors using a high-pres-
sure cleaner or steam cleaner, observe the
manufacturer's information on maintaining
the correct distance between the vehicle
and the high-pressure cleaner.
Cleaning the reversing camera*
X
Use clear water and a soft cloth to clean
camera lens
:
.
!
Do not clean the camera lens and the area
around the reversing camera with a high-
pressure cleaner.
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. Reg-
ular care of the exhaust tail pipes will ensure
that their original shine is restored.
!
Do not clean the exhaust tail pipes with
alkaline-based cleaning agents such as
wheel cleaner.
X
Clean the exhaust tail pipes with a chrome
care product approved by Mercedes-Benz.
Trailer coupling*
The ball coupling must be cleaned if it
becomes dirty or corroded.
X
Remove any rust using a wire brush.
X
Remove dirt with a clean, lint-free cloth or
a brush.
!
Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
Care
335
Ope
ration
* optional
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 335
Z
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:18:29; WK