Arrival time and distance to destination
X
To display: select
Navi
Q
Text infor‐
mation on map
.
The selection list appears. A
#
dot indi-
cates the current setting.
X
Select
Arrival time/Distance
.
This will switch the display for arrival time
and distance to destination on or off,
depending on the previous setting.
Current street
You can set whether COMAND displays the
street you are currently driving on at the bot-
tom of the map.
X
To display: select
Navi
Q
Text infor‐
mation on map
.
The selection list appears. A
#
dot indi-
cates the current setting.
X
Select
Current street
.
This will either show or hide the current
street, depending on the previous setting.
Geo-coordinates
:
Height above sea level
;
Geo-coordinate display
=
Number of GPS satellites from which
a signal can be received
i
There must be sufficient GPS reception
for displays
:
,
;
and
=
to be shown.
Height display
:
may vary from the actual
value, because the navigation system uses
the GPS signal for the calculation.
Display options with geo-coordinate dis-
play switched on
If the crosshair is displayed on the map view
(map has been moved manually), only display
=
is visible. It shows either the geo-coordi-
nates of the crosshair or other data on the
crosshair position, e.g. a street name. The
digital map must contain the relevant data in
order for this other data to be displayed.
i
If there is no crosshair on the map view,
displays
:
,
;
and
=
are visible. Dis-
play
;
shows the geo-coordinates of the
current vehicle position.
X
To switch the geo-coordinate display on
or off: select
Navi
Q
Text informa‐
tion on the map
.
The selection list appears. A
#
dot indi-
cates the current setting.
X
Select
Geo-coordinates
.
The geo-coordinate display is switched on
or off, depending on the previous status.
X
To exit the menu: slide
X
V
Y
.
Topographical map
You can have the map displayed as a topo-
graphical map. Differing heights in the terrain
can then be identified though colour grada-
tions. Colour gradations are available starting
at a scale of 10 km.
X
Select
Navi
.
X
Tick the
Topographical map
menu item.
Town view
If you have set the map orientation as a 3D
map (
Y
page 138), a large number of towns
can be displayed as 3D town views.
Navigation system* (introduction)
139
CO
MA
ND
* optional
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 139
Z
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:17; WK
