Mercedes-Benz 2007 C 230 Operator'S Manual Download Page 98

Page: 98 / 441

Controls in detail

Locking and unlocking

Opening the trunk from the outside

Handle

왘

Press and hold button

on the

SmartKey until trunk unlocks and be-
gins to open.

왘

Pull on handle

The vehicle must be unlocked.

Opening the trunk from the inside

Remote trunk opening switch

왘

Press remote trunk opening switch

until the trunk begins to open.

The trunk opens. The indicator lamp in
remote trunk opening switch

comes

on and remains lit until the trunk is
closed.

Closing the trunk

Handle

Handles

왘

Lower trunk lid by pulling firmly on
handle

or handles

왘

Close trunk lid with hands placed flat
on the trunk lid.

If the trunk does not open, it is still locked

separately (

컄

page 99).

The trunk can also be opened from its inside

in an emergency, see “Trunk emergency re-
lease” (

컄

page 98).

If the trunk does not open, it is still locked

separately (

컄

page 99).

The trunk can also be opened be opened us-

ing button

on the SmartKey or from its in-

side in an emergency, see “Trunk emergency
release” (

컄

page 98).

Warning!

To prevent possible personal injury, always

keep hands and fingers away from the trunk

opening when closing the trunk.

컄컄

Summary of Contents for 2007 C 230


























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands

Mercedes-Benz 2007 C 230, Operator'S Manual

Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands