Mercedes-Benz 2007 C 230 Operator'S Manual Download Page 336

Page: 336 / 441

335

Practical hints

What to do if …

Text messages

Display message

Possible cause/consequence

Possible solution

ABS

ABS, ESP
inoperative
See
Operator’s
Manual

The ABS and ESP

are not available due to

a malfunction.

The BAS is also deactivated.

The brake system is still functioning
normally but without but without the
systems specified above.

왘

Continue driving with added caution.
Wheels will lock during hard braking,
reducing steering capability.

왘

Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.

Failure to follow these instructions in-
creases the risk of an accident.

Cruise cont.
and SPEED-
TRONIC

inoperative

Cruise control is malfunctioning.

Have the cruise control checked by an au-
thorized Mercedes-Benz Center.

ESP

inoperative
See
Operator’s
Manual

The ESP

has switched off due to a

malfunction.

The ABS and the BAS might not be opera-
tional.

The brake system is still functioning
normally but without the systems speci-
fied above.

왘

Continue driving with added caution.

왘

Contact an authorized Mercedes-Benz
Center as soon as possible.

Failure to follow these instructions
increases the risk of an accident.

Summary of Contents for 2007 C 230


























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands

Mercedes-Benz 2007 C 230, Operator'S Manual

Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands