Mercedes-Benz 2007 C 230, Operator'S Manual

Page: 374 / 441

373
Practical hints
Replacing bulbs
Front turn signal lamp bulb
왘
Turn bulb socket
3
with the bulb
counterclockwise and remove it.
왘
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket
3
.
왘
Press new bulb gently into bulb
socket
3
and turn clockwise until it
engages.
왘
Place bulb socket
3
back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
왘
Press the clamp on housing cover
2
and remove it.
왘
Pull out bulb socket
5
with the bulb.
왘
Pull the bulb out of bulb socket
5
.
왘
Press the new bulb into bulb socket
5
.
왘
Press bulb socket
5
back into the
lamp.
왘
Align housing cover
2
and press until
it engages.
Additional turn signal lamp bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to
function, the entire turn signal unit must be
replaced. Have the turn signal unit
replaced by an authorized Mercedes-Benz
Center.
Front side marker lamp bulbs
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘
Turn the exterior lamp switch to
position
M
(
컄
page 109).
왘
Open the trunk (
컄
page 96).
Tail lamp unit
1
Latch
컄컄