Mercedes-Benz 2007 C 230 Operator'S Manual Download Page 82

Page: 82 / 441

Safety and Security

Panic alarm*

왔

Panic alarm*

button

Activating

왘

Press and hold button

for at least

1 second.

An audible alarm and flashing exterior
lamps will operate briefly.

Deactivating

왘

Press button

again.

왘

Insert SmartKey in starter switch.

Canada only:

Only vehicles equipped with an anti-theft alarm
system* have SmartKeys with integrated panic
button

USA only:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interfer-

ence, and

(2) this device must accept any interference re-

ceived, including interference that may
cause undesired operation.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

Canada only:

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:

(1) This device may not cause interference, and

(2) this device must accept any interference re-

ceived, including interference that may
cause undesired operation of the device.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

Summary of Contents for 2007 C 230


























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands

Mercedes-Benz 2007 C 230, Operator'S Manual

Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands