Mercedes-Benz 2007 C 230 Operator'S Manual Download Page 243

Page: 243 / 441

242

Controls in detail

Useful features

Reinstalling ashtray insert

왘

Push the ashtray insert

down into

the retainer until it engages.

왘

Push down cover plate

to close

ashtray.

The cover plate engages.

Rear seat ashtray

Button

Ashtray insert

Cover

왘

Pull at top of cover

Removing ashtray insert

왘

Push button

to disengage ashtray

insert

and remove it.

Reinstalling ashtray insert

왘

Push the ashtray insert

down into

the retainer until it engages.

왘

Push at top of cover

to close

ashtray.

Cigarette lighter

왘

Switch on the ignition (

컄

page 32).

Warning!

Never touch the heating element or sides of

the lighter; they are extremely hot. Hold the

knob only.

Make sure that any children traveling with

you do not injure themselves or start a fire

with the hot cigarette lighter.

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it

with you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. A child’s

unsupervised access to a vehicle could

result in an accident and/or serious

personal injury.

Summary of Contents for 2007 C 230


























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands

Mercedes-Benz 2007 C 230, Operator'S Manual

Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands