Mercedes-Benz 2007 C 230 Operator'S Manual Download Page 376

Page: 376 / 441

375

Practical hints

Replacing wiper blades

왔

Replacing wiper blades

Removing and installing wiper blades

왘

Remove SmartKey from starter switch.

Removing wiper blades

Unlocking

Tab

왘

Pull the tab

in direction of arrow

The wiper blade is unlocked.

왘

Lift up the wiper arm as far as you need
to remove the wiper blade.

왘

Carefully fold the wiper arm back to
rest on the windshield.

Warning!

For safety reasons, switch off wipers and

remove SmartKey from starter switch be-

fore replacing a wiper blade. Otherwise, the

wiper motor could suddenly turn on and

cause injury.

Warning!

Wiper blades are components that are sub-

ject to wear and tear. Change the wiper

blades twice a year, preferably in the spring

and fall. Otherwise the windows will not be

properly wiped. As a result, you may not be

able to observe surrounding traffic condi-

tions and could cause an accident.

Never open the hood when the wiper arms

are folded forward.

For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Center.

Do not pull on the wiper blade inserts. They

could tear.

Hold on to the wiper arm. If released, the

force of the impact from the tensioning spring
could crack the windshield.

Summary of Contents for 2007 C 230


























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands

Mercedes-Benz 2007 C 230, Operator'S Manual

Search results

Summary of Contents for 2007 C 230

Reviews:

Related manuals for 2007 C 230

Brands by name

Popular brands