Mercedes-Benz 2001 C 320 Operator'S Manual Download Page 164

Page: 164 / 474

163

Controls in detail

Automatic transmission*

Coasting the vehicle, or driving for any
other reason with gear selector lever
in

can result in transmission damage

that is not covered by the
Mercedes-Benz Limited Warranty.

Warning!

Getting out of your vehicle with the gear

selector lever not fully engaged in position

is dangerous. Also, position

alone is not

intended to or capable of preventing your

vehicle from moving, possibly hitting people

or objects.

Always set the parking brake in addition to

shifting to position

(

컄

page 50).

When parked on an incline, turn the front

wheels towards the road curb.

Do not park this vehicle in areas where com-

bustible materials such as grass, hay, or

leaves can come into contact with the hot

exhaust system, as these materials could be

ignited and cause a vehicle fire.

Warning!

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it

with you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. Children

could move the gear selector lever from

position

, which could result in an accident

and/or serious personal injury.

Summary of Contents for 2001 C 320



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands

Mercedes-Benz 2001 C 320, Operator'S Manual

Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands