Mercedes-Benz 2001 C 320 Operator'S Manual Download Page 357

Page: 357 / 474

356

Practical hints

What to do if …

Display message

Possible cause

Possible solution

ESP

malfunction.
Visit workshop.

The ESP is deactivated because of a
malfunction.

The brake system is still functioning
normally but without the ESP available.

왘

Continue driving with added caution.

왘

Visit an authorized Mercedes-Benz
Center as soon as possible.

Failure to follow these instructions
increases the risk of an accident.

Display malfunction.
Visit workshop.

The ESP or the ESP display is
malfunctioning.

왘

Continue driving with added caution.

왘

Visit an authorized Mercedes-Benz
Center as soon as possible.

Failure to follow these instructions
increases the risk of an accident.

SRS

Restraint system
malfunction
Drive to workshop

The system is malfunctioning.

왘

Drive with added caution to the
nearest authorized Mercedes-Benz
Center.

Warning!

In the event a malfunction of the SRS is indi-

cated as outlined above, the SRS may not be

operational. For your safety, we strongly

recommend that you visit an authorized

Mercedes-Benz Center immediately to have

the system checked; otherwise the SRS may

not be activated when needed in an

accident, which could result in serious or

fatal injury, or it might deploy unexpectedly

and unnecessarily which could also result in

injury.

Summary of Contents for 2001 C 320



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands

Mercedes-Benz 2001 C 320, Operator'S Manual

Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands