Mercedes-Benz 2001 C 320 Operator'S Manual Download Page 394

Page: 394 / 474

393

Practical hints

Replacing wiper blades

왔

Replacing wiper blades

Removing

왘

Remove SmartKey from starter switch.

왘

Fold wiper arm forward.

Unlock

Lock

왘

Pull the tab in the direction of arrow

and remove windshield wiper.

Installing

왘

Slide the wiper blade into the cutout on
the wiper arm (see arrows).

왘

Slide the tab back in the direction of
arrow

until it audibly engages.

왘

Fold the wiper arm back to rest on the
windshield.

Warning!

For safety reasons, remove SmartKey from

starter switch before replacing a wiper

blade, otherwise the motor could suddenly

turn on and cause injury.

Never open the hood when the wiper
arm is folded forward.

Hold onto the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.

Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.

Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.

For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

Summary of Contents for 2001 C 320



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands

Mercedes-Benz 2001 C 320, Operator'S Manual

Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands