Mercedes-Benz 2001 C 320 Operator'S Manual Download Page 214

Page: 214 / 474

213

Controls in detail

Audio system

Calling up the ESN information menu

왘

Press

INF

soft key.

왘

Press

ESN

soft key.

The twelve-digit electronic serial num-
ber (ESN) of the SAT tuner* installed in
your vehicle is displayed.

왘

Press

RET

soft key to exit the menu.

CD mode

Safety precautions

General notes

The system may not be able to play audio
CDs with copy protection.

Playing copied CDs may cause malfunc-
tions during playback.

Warning!

The single CD player and the CD changer*

are Class 1 laser products. There is a danger

of invisible laser radiation if the housing is

opened or damaged.

Do not open the housing. The single CD

player and the CD changer* do not contain

any parts that can be serviced by the user.

For safety reasons, have any service work

which may be necessary performed only by

qualified personnel.

Warning!

In order to avoid distraction which could

lead to an accident, the driver should insert

CDs with the vehicle at a standstill and oper-

ate the audio system only if permitted by

road, weather and traffic conditions.

Bear in mind that at a speed of just 30 mph

(approximately 50 km/h), your car covers a

distance of 44 feet (approximately 14 m) ev-

ery second.

Summary of Contents for 2001 C 320



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands

Mercedes-Benz 2001 C 320, Operator'S Manual

Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands