Mercedes-Benz 2001 C 320 Operator'S Manual Download Page 398

Page: 398 / 474

397

Practical hints

Flat tire

Mounting the spare wheel

Wheel bolt for light alloy rims

Wheel bolt for light alloy spare wheel
rim size 4

B x15 H2

왘

Clean contact surfaces of wheel and
wheel hub.

왘

Guide the spare wheel onto the align-
ment bolt and push it on.

왘

Insert wheel bolts and tighten them
slightly.

왘

Inflate the spare tire using the electric
air pump (

컄

page 398).

Wheel bolts

must be used when

mounting spare wheel rim
size 4

B x 15 H2 (

컄

page 422).

The use of any wheel bolts other than
wheel bolts

for spare wheel rim

size 4

B x15 H2 can cause physical

damage to the vehicle.

To avoid paint damage, place wheel flat
against hub and hold it there while
installing first wheel bolt.

Warning!

Always replace wheel bolts that are dam-

aged or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be re-

paired immediately. Do not continue to drive

under these circumstances! Contact an

authorized Mercedes-Benz Center or call

Roadside Assistance.

Incorrect wheel bolts or improperly tight-

ened wheel bolts can cause the wheel to

come off. This could cause an accident.

Make sure to use the correct mounting

bolts.

Warning!

Inflate spare wheel with collapsible tire only

after the wheel is properly mounted.

Inflate the spare wheel tire using the electric

air pump before lowering the vehicle.

컄컄

Summary of Contents for 2001 C 320



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands

Mercedes-Benz 2001 C 320, Operator'S Manual

Search results

Summary of Contents for 2001 C 320

Reviews:

Related manuals for 2001 C 320

Brands by name

Popular brands