Part Setting The System
The TS690 and TS690ID can have up to three predefined part set configurations. Each
configuration allows the alarm system to set with one or more circuits isolated. Normally the
alarm company will configure each part set option, however the master user may also
configure the part sets, providing the alarm company has programmed the alarm system
to allow this facility.
SYSTEM OPEN
17:30
01 Jan
Press ENT to
Select Functions
Press ENT to
Do part set A ?
Please Exit Now.
Time left > 0035
Part Set A
17:31
01 JAN
?
A B C
A B C
A B C
? ? ?
1
2
? ? ? ?
? ? ? ?
OPEN
Func.
PS. A
0035
P.SET
A
1731
3
4
1
2
3
4
1
2
3
4
or or
or or
or or
LCD Remote
Starburst Remote
LED Remote
1.
From the unset (open) mode enter your passcode.
2.
Select the required part set mode by pressing
[A]
,
[B]
or
[C]
.
3.
Either press
[ENT]
when the display shows the required part set mode or wait for 5
seconds after which the exit sounder will start and the display will show the remaining
exit time.
4.
Leave the area by the designated exit route, close the final door and press the exit
terminator button (if fitted). The system is part set when the exit sounder stops.
9
