LID TAMP
LINE FLT
R.TMP 01
TAMP'R 02
SET FAIL
BUSY
Display Messages (Cont.)
The lid of the control panel has been removed. If the fault is not cleared you
will not be able to set the alarm system. To silence the alarm simply enter
your passcode. Contact your alarm company for further advice.
Your alarm system is fitted with a remote signalling device which is reporting
a telephone line fault. The system will also generate a chime tone every
minute to warn you that the fault exists, to silence the chime tones simply
enter your passcode. If the fault is not cleared you may not be able to set
the alarm system. If the fault persists, contact your alarm company for
further advice.
The lid of a remote keypad has been removed (remote 01). If the fault is not
cleared you will not be able to set the alarm system. To silence the alarm
simply enter your passcode. Contact your alarm company for further
advice.
The system has failed to set. This normally caused by a circuit being left
open at the time of setting. Check that all circuits are healthy before
attempting to set the alarm system.
Another user is operating the alarm system from another remote keypad.
When they have finished all remote keypads will revert to normal operation.
A tamper alarm has occurred from a detection circuit (circuit 02). Normally
caused by removing the cover from a movement sensor or a break in the
circuit cabling. To silence the alarm simply enter your passcode. If the fault is
not cleared you will not be able to set the alarm system. Contact your alarm
company for further advice.
PANEL LID TAMPER
17:30 01 Jan
LID TAMP
LT
PHONE LINE FAULT
17:30 01 Jan
LINE FLT
LF
REM TAMPER 01
17:30
01 Jan
R.TMP 01
rT.01
SET FAIL
17:30
01 Jan
SET FAIL
SF
SYSTEM IS BUSY
PLEASE WAIT.
BUSY
BUSY
TAMPER 02
17:30
01 Jan
TAMP'R 02
TA.02
42
