6 System Installation
6 System Installation
19 inch rackmount
Mounting brackets and fixing screws are included in the scope of delivery of a rackmount system. If the
system is supplied with an antenna and antenna cable, it is advisable to first mount the antenna in a suitable
location (see chapter Antenna Mounting) and lay the antenna cable. The power supply cable and the network
cable should also be available at the installation site before the system is installed. Make sure that all nec-
essary adapters for connecting the device are available. Make sure that the voltage is disconnected from the
power source during installation.
Figure: M4000 rack mount. The screws for rack mounting are not included in the delivery.
21-inch ETSI rack mount
.
Due to the low depth of the housing, the M4000 chassis can also be installed in ETSI racks with a depth of
30/60 cm.
ETSI racks (=535 mm) are defined by the European Telecommunications Standards Institute
(ETS 300 119).
IMS - LANTIME M4000
Date: 27th May 2021
25
