9018116
49 / 54
Notes on conducting descaling:
Only use products suitable for cleaning and disinfection machines (for the chemo-
thermal cleaning disinfection process) for descaling. Follow the manufacturer's
instructions.
Completely flush the de-scaling agent out of the cleaning and disinfection machine.
To do so, perform 1 or 2 rinse cycles with fresh water.
• Where necessary, assign Customer Service the task of descaling the boiler.
10.6 Spare parts
Please provide the following information on any query and/or when ordering spare
parts:
Type:
……………………………………………………..
SN:
……………………………………………………..
……………………………………………………..
(This information can be found on the type plate,
see chapter “Type label” on page
11
Non-use for several days
11.1 Break in operation (e.g. seasonal operation)
- Run self-cleaning programme and clean the machine, .
- Close the on-site shut-off valve.
• Switch off on-site mains isolator.
• Manually open a gap in the front door or hood to prevent germ formation and
odours.
• Frost protection: If necessary, have the machine frost-proofed by the authorised
service technician.
11.2 Commissioning after break in operation
• Set up the machine for 24 h at 25°C if it is not frost-free. Have an authorised
service technician commission the machine again.
• Have reverse osmosis (GiO MODULE) (option) disinfected in the case of down-
times of more than 6 months.
• Open the on-site shut-off valve and switch on the main switch.
• Put machine into operation, .
12
Dismantling and disposal
In addition to valuable raw materials and recyclable materials, the packaging and the
old device may also contain substances that are harmful to health and the environ-
ment and were required for the function and safety of the old device.
Please do not dispose of your old device in residual waste. Instead, contact your
dealer or the collection points set up in your community for information regarding the
disposal of your old device.
Summary of Contents for TopClean M
Page 53: ...9018116 53 54 15 Notes...