Meiko TopClean M, Instructions For Use Manual, Page: 12 / 54

12 / 54 9018116
Information on the use of descaling agents
Residue from descaling agents can cause damage to the plastic components and
sealing materials in the machine.
• Acquire information from the manufacturers of these products.
• Please observe the manufacturer's hazard warnings.
• Thoroughly remove any residue after use.
Information on cleaning the machine
Foam leads to malfunctions and poor cleaning results in the cleaning and disinfec-
tion machine.
• Do not use a foaming manual dishwashing detergent for precleaning or for
cleaning the machine.
• Allow machine components and washware to cool down before touching.
Information on cleaning the surrounding area
When cleaning the surrounding area, the machine can be damaged by aggressive
external influences (steams, detergents) or the ingress of water.
• Do not use aggressive detergents (e.g. aggressive tile cleaner).
• If installed at ground level, never allow the surrounding area to flood.
Notices on electrics and electronics
There is a danger to life if exposed parts and supply lines under electrical voltage
are touched.
• Please take note of the warning notices in these instructions and the signs on
the cleaning and disinfection machine.
• Whenever you are working on electrical components in the machine, ensure
that electrical connections are physically secure.
• Whenever you are working on electrical components in the machine, check
wires and cables for any potential damage and replace, if necessary.
Incorrect cleaning can cause damage to the electronics.
• The cleaning and disinfection machine, control cabinets and other electrical
components must never be sprayed with a hose or high pressure cleaner.
• Ensure that no water can enter the machine by accident.
Notice on non-ionising radiation
Non-ionising radiation is not produced intentionally but simply comes about due to
electrical operating equipment (e.g. electrical motors, high-voltage cables and
magnetic coils). In addition, the machine has no strong permanent magnet.
3.7 What to do in the event of an emergency
• In dangerous situations, disconnect from the power supply using the locally
available mains isolator.