Meiko TopClean M Instructions For Use Manual Download Page 4 | Manualshive

Page: 4 / 54

Meiko TopClean M Instructions For Use Manual Download Page 4

4 / 54

9018116

1

Information on instructions for use

Before using the machine, read the instructions for use and the related documents
carefully and keep them in a safe place and within easy reach.

These instructions for use can be downloaded from the following address:
https://www.meiko.de and https://www.meiko.info or https://partnernet.meiko-
global.com.

1.1

Product identification

These instructions for use apply to the following machine type:

Cleaning and disinfection machine

TopClean M, M2 type.

1.2

Delivery contents

The delivery contents include:

•  1x TopClean M cleaning and disinfection machine
•  Connection hoses for fresh water and waste water
•  Documentation

Optionally available:

• Racks, as per rack range

1.3

Related documents

The following documents provide additional information to these instructions for use:

•  Installation drawing
•  Wiring diagram
•  Installation instructions for optional components (e.g. GiO MODULE)

External documents of the manufacturer of the respiratory protective equip-
ment

• Current washing instructions
• Current release

2

Liability and warranty

All of the manufacturer's obligations arise from the relevant purchase contract, which
also contains the entire and only valid guarantee provisions. These contractually
guaranteed provisions shall be neither extended nor restricted as a result of any ex-
planations given in the instructions.

If you follow these operating instructions for use, your washer-disinfector will always
work to your complete satisfaction and have a long service life.

The delivered device corresponds to the state of technology and safety regulations
valid at the time of production/delivery.

The information, data and notes specified in the instructions for use correspond to
the latest version at the time of printing. No claims for already delivered systems
may be asserted based on these statements, illustrations and descriptions.

Claims must be reported to the manufacturers immediately after determination of the
defect or error.

«
...
2
3
4
5
6
...
»

Summary of Contents for TopClean M























































Reviews:

No comments