36 / 54
9018116
9.5.1
Replace canister
Lack of rinse aid
Lack of detergent/disinfectant
Note
The canisters for detergent and rinse aid are located in the immediate vicinity of the
cleaning and disinfection machine.
Note
When using a suction lance which detects whether a canister is empty, a shortage
of detergent/disinfectant or rinse aid will be indicated on the display.
A canister is empty.
1. Remove the suction lance from the empty canister and insert it into a full canis-
ter.
2. If necessary, ventilate the pipelines, see page 41.
9.6
Water change programme (option)
A water change programme can be assigned to the cleaning programme keys. In
the standard setting, the water change programme is stored at the cleaning pro-
gramme key III.
The cleaning and disinfection machine cleans normally and empties the tank. The
fresh water final rinse follows. The water from the fresh water final rinse is already
used for refilling the wash tank. The control light above the cleaning key goes out.
The following options are now available:
• Open door, remove rack, close door.
• Press cleaning programme key I or II if the following programme is to be imple-
mented without a complete water change.
Machine is made ready for operation.
• Open door, remove rack, close door and press cleaning key.
Machine is made ready for operation and the cleaning programme is started di-
rectly after that.
• Press the Off key.
The self-cleaning programme with subsequent emptying of the tank and boiler is
started in order to decommission the cleaning and disinfection machine.
Summary of Contents for TopClean M
Page 53: ...9018116 53 54 15 Notes...