Megger PVS 100i, User Manual

Page: 34 / 47

34
Element Description
Using this button, an offset compensation can be initiated.
This function is relevant only for setting up new measurement profiles. The
button is shown only if Expert mode is activated in the device settings (see
section 7.1).
Information on the current status of the measurement and the required
voltages:
Data A flashing display signals an existing data connection to
the base unit.
/ If the status of the display does not change for an
extended period, it is probable that there is a
communication problem between the base unit and the
mobile unit.
U
X
Test voltage is present at measurement input U
X
or the
HV sensor.
There is no test voltage present at measurement input
U
X
or the HV sensor.
U
V
The mobile unit is supplied with mains voltage.
The mobile unit is working in battery mode (connection to
base unit imperative).